AiP74HC374
AiP74HC374 is the I-CORE functional equivalent of SN74HC374 / 74HC374: octal D-type flip-flop; positive edge-trigger; 3-state, TSSOP-20 / SOP-20, 2.0–6.0 V, −40 to 125 °C. Factory-original stock in Shenzhen; free samples with shipping paid.
Key specifications
| Manufacturer | I-CORE (Wuxi I-CORE Electronics Co., Ltd.) |
|---|---|
| Part number | AiP74HC374 |
| Function | Octal D-type flip-flop; positive edge-trigger; 3-state |
| Package | TSSOP-20 / SOP-20 |
| Order codes in stock | AIP74HC374TA20.TR, AiP74HC374SA20, AiP74HC374TA20.TB |
| Supply voltage | 2.0–6.0 V |
| Operating temperature | −40 to 125 °C |
| Replaces | SN74HC374 |
| 74HC374 | |
| Compliance | RoHS (EU 2011/65/EU + 2015/863) and REACH SVHC — third-party lab tested; reports on request |
| Datasheet | PDF, English |
Questions buyers ask
- Can AiP74HC374 replace SN74HC374?
- AiP74HC374 is I-CORE's functional equivalent of SN74HC374, 74HC374 in the same TSSOP-20 / SOP-20 package. Standard parts in this family share the industry pinout, but please compare both datasheets — supply range, timing and absolute maximum ratings — before design-in.
- What is the supply voltage and temperature range of AiP74HC374?
- Supply: 2.0–6.0 V. Operating temperature: −40 to 125 °C. See the datasheet for full electrical characteristics.
- Is AiP74HC374 in stock, and can I get a free sample?
- Yes, it is held in stock in Shenzhen. Free samples are available for evaluation, with shipping paid by us. For production orders, SMD parts can be ordered from 1 pc and DIP parts ship in full tubes; orders ship within 2–3 business days after payment.
- Is it original I-CORE product?
- Yes. We supply factory-original I-CORE (Wuxi I-CORE Electronics) parts in sealed reels and tubes. Our ISO 9001, ISO 14001 and ISO 45001 certificates are shown on the home page; RoHS and REACH test reports are available on request.
Datasheet highlights
From the I-CORE English datasheet AiP74HC/HCT374-AX-LJ-A023EN (revision 2023-04-B1). The full datasheet PDF is linked above.
General description
The AiP74HC/HCT374 is an octal positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs also include clamp diodes, this enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. The AiP74HCT374 features reduced input threshold levels to allow interfacing to TTL logic levels.
Key features
- For AiP74HC374: CMOS level
- For AiP74HCT374: TTL level
- Octal bus interface
- Non-inverting 3-state outputs
- 8-bit positive, edge-triggered register
- Common 3-state output enable input
- Independent register and 3-state buffer operation
- Specified from -40℃ to +125℃
Request a quote
We reply within 1 business day. Free samples — shipping on us. Tell us the part number, quantity and your application.
Related I-CORE parts
74HC & CD4000 standard logic equivalents → · See all 375 parts →