AiP74LVC16245
AiP74LVC16245 is the I-CORE functional equivalent of SN74LVC16245 / 74LVC16245: 16-bit bus Transceiver; 3-state, TSSOP-48, 1.2–5.5 V, −40 to 125 °C. Factory-original stock in Shenzhen; free samples with shipping paid.
Key specifications
| Manufacturer | I-CORE (Wuxi I-CORE Electronics Co., Ltd.) |
|---|---|
| Part number | AiP74LVC16245 |
| Function | 16-bit Bus Transceiver; 3-state |
| Package | TSSOP-48 |
| Order codes in stock | AIP74LVC16245TA48.TR |
| Supply voltage | 1.2–5.5 V |
| Operating temperature | −40 to 125 °C |
| Replaces | SN74LVC16245 |
| 74LVC16245 | |
| Compliance | RoHS (EU 2011/65/EU + 2015/863) and REACH SVHC — third-party lab tested; reports on request |
| Datasheet | PDF, English |
Questions buyers ask
- Can AiP74LVC16245 replace SN74LVC16245?
- AiP74LVC16245 is I-CORE's functional equivalent of SN74LVC16245, 74LVC16245 in the same TSSOP-48 package. Standard parts in this family share the industry pinout, but please compare both datasheets — supply range, timing and absolute maximum ratings — before design-in.
- What is the supply voltage and temperature range of AiP74LVC16245?
- Supply: 1.2–5.5 V. Operating temperature: −40 to 125 °C. See the datasheet for full electrical characteristics.
- Is AiP74LVC16245 in stock, and can I get a free sample?
- Yes, it is held in stock in Shenzhen. Free samples are available for evaluation, with shipping paid by us. For production orders, SMD parts can be ordered from 1 pc and DIP parts ship in full tubes; orders ship within 2–3 business days after payment.
- Is it original I-CORE product?
- Yes. We supply factory-original I-CORE (Wuxi I-CORE Electronics) parts in sealed reels and tubes. Our ISO 9001, ISO 14001 and ISO 45001 certificates are shown on the home page; RoHS and REACH test reports are available on request.
Datasheet highlights
From the I-CORE English datasheet AiP74LVC/LVCH16245-AX-LJ-B073EN (revision 2025-12-B2). The full datasheet PDF is linked above.
General description
The AiP74LVC/LVCH16245 are 16-bit transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable (n OE ) inputs for easy cascading and two send/receive (nDIR) inputs for direction control. n OE controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs. These features allow the use of these devices in mixed 3.3V and 5V applications. The AiP74LVCH16245 bus hold on data inputs eliminates the need for external pull-up resistors to hold unused inputs.
Key features
- 5V tolerant inputs/outputs for interfacing with 5V logic
- Wide supply voltage range from 1.2V to 5.5V
- CMOS low power consumption
- MULTIBYTE flow-through standard pin-out architecture
- Low inductance multiple power and ground pins for minimum noise and ground bounce
- Direct interface with TTL levels
- High-impedance when VCC=0V
- All data inputs have bus hold (AiP74LVCH16245 only)
Request a quote
We reply within 1 business day. Free samples — shipping on us. Tell us the part number, quantity and your application.
Related I-CORE parts
74HC & CD4000 standard logic equivalents → · See all 375 parts →